![]() Those are backends, filters, and other binaries that were once part of CUPS but have been dropped from the project. The Linux Foundation's OpenPrinting workgroup provides cups-filters. To test if they are working before creating a PKGBUILD, PPD files can be manually added to /usr/share/cups/ model, the driver should be available after the next restart of the cups service.ĬUPS includes support for AirPrint and IPP Everywhere printers. When a PPD file is provided to CUPS, the CUPS server will regenerate the PPD files and save them in /etc/cups/ppd/. It also supplies PPD files for each printer, but most are available through foomatic or the recommended driver package. The OpenPrinting Printer List provides driver recommendations for many printers. For details on how CUPS uses PPDs and filters, see. To drive a printer, CUPS needs a PPD file and, for most printers, some filters. See CUPS/Printer-specific problems for an incomplete list of drivers that others have managed to get working. The drivers for a printer may come from any of the sources shown below. (Discuss in Talk:CUPS#CUPS printer drivers and backends are deprecated) Explain what is/will be handled by cups and what by cups-filters and/or other software. Reason: CUPS is planning to drop PPD and driver support ( CUPS issue 103), instead relying entirely on IPP Everywhere. local hostname resolution with Avahi and restart rvice. To discover, make use of discovered or share printers using DNS-SD/mDNS, setup. # dmesg | grep -i parport parport0: Printer, Hewlett-Packard HP LaserJet 2100 Series To use a parallel port printer, the lp, parport and parport_pc kernel modules are required. To see if your USB printer is detected, make sure you have the usbutils package installed, then:īus 001 Device 007: ID 03f0:1004 Hewlett-Packard DeskJet 970c/970cse For example, if the printer is connected to a USB port, it uses the USB back-end.Īdditional steps for printer detection are listed below for various connection interfaces.
0 Comments
Leave a Reply. |